Brand: Berkland

Color: Sealant Black

Features:

• FAST-CURING WINDSHIELD ADHESIVE — OEM QUALITY BOND — Professional-strength polyurethane formula bonds windshields, rear windows, and side glass with fast-curing adhesive that reaches handling strength in hours, not days. OEM-level performance for auto glass replacement and repair.
• HIGH BOND STRENGTH — WON'T SHRINK OR CRACK — Engineered for permanent, flexible adhesion that holds through temperature swings, road vibration, and weather exposure. The cured seal stays flexible without shrinking or cracking over time — critical for maintaining a watertight windshield.
• WORKS ON VEHICLE & RV GLASS — Use as a windshield sealant, rear view mirror adhesive, or window seal compound on cars, trucks, SUVs, vans, and RVs. Bonds glass to metal, fiberglass, and painted surfaces with equal strength.
• EASY APPLICATION — STANDARD CAULKING GUN COMPATIBLE — Cartridge loads into any standard caulking gun for controlled, even bead placement. No proprietary tools required. Includes disposable nitrile gloves for clean, professional results.
• BLACK URETHANE FORMULA — 10.5 FL OZ — Black color matches OEM windshield sealant lines for factory-appearance repairs. One cartridge provides enough adhesive for a full windshield installation on most vehicles.

model number: BGAutoBlack

Part Number: BGAutoBlack

Details: Immediate Strength Development

This fast-curing automotive window glue boasts exceptional bonding power.

One application of the glass adhesive glue is all it takes for permanent weather-resistant protection.

From windshield and glass sealer to RV window sealant, this compound can do it all.

Directions for Use:

- Detach wipers and accents, then use a utility knife to slice through the current urethane sealer
- Remove existing glass with care, and carefully clean debris from all surfaces
- Align and dry set the new glass using tape strips for positioning. Once marked, remove the windshield
- Remove the majority of the old car glass adhesive from the pinch-weld, leaving only a small layer
- Apply single-step primer* to any bare metal and conduct any required abrasive cleaning
- Clean the interior surface where contact will be made with windshield and glass sealant
- Apply a thin layer of primer* around the edge and let dry
- Cut the applicator tip on the windshield leak sealant to desired size
- Directly apply this windshield mount adhesive over the old auto window sealant
- Position the glass using the tape markings, and press into place to complete contact
- Squeeze out extra urethane windshield adhesive, or fill voids if necessary
- Remove the tape alignment strips, reattach moldings, wipers, and other accents
- Finally, clean up any excess windshield urethane adhesive

* To use without primer, ensure the bonding surface is free from contamination prior to application of the car windshield sealant.
The glass must also be pre-cleaned with a non-antistatic glass cleaner.

Additional Instructions: Designed for use at an ambient temperature of 42-95 F.
Place the car windshield adhesive in a plastic bag and submerge it in hot water before use for best results.

Package Dimensions: 9.9 x 2.8 x 2.2 inches