Tycon TPDIN-SC48-20 MPPT Solar Controller with 7 Port Gigabit PoE Switch, 48V 20A, 802.3at and 24/48V Passive PoE, Remote Monitoring and Control, DIN Rail Mount
- Tycon
Tycon TPDIN-SC48-20 MPPT Solar Controller with 7 Port Gigabit PoE Switch, 48V 20A, 802.3at and 24/48V Passive PoE, Remote Monitoring and Control, DIN Rail Mount
- Tycon
$1,640.25
Secure Checkout With
Description
Brand: Tycon
Features:
- TPDIN MPPT 48V 20A SOLAR CONTROLLER: Web manageable MPPT solar controller, battery charging max 20A, supports up to 1kW solar input with max PV Voc 100V and PV Vmp 90V. Solar input voltage 56VDC min to 100VDC max, typical controller efficiency 96%.
- TEMPERATURE COMPENSATED SMART BATTERY CHARGING: Properly charges GEL, AGM, or Lithium batteries and extends their life, with a balance charge mode for periodic battery bank maintenance and automatic low voltage battery disconnect, 42V to 48V settable in web interface.
- 7 PORT GIGABIT POE SWITCH: 4 Gigabit 802.3at or 24/48V passive PoE and 3 Gigabit 24/48V passive PoE ports, each port capable of 0.645A max. Outputs can be switched by user between 802.3at (port 1-4 only), 48VDC, 24VDC or OFF through the web interface.
- REMOTE MONITORING AND CONTROL: The web interface can measure and log battery voltage, battery current, input voltage/current, load current and battery temperature. Access via web browser and SNMP, settable ping watchdog to power cycle a port, automated email alerts.
- 2.25A AUXILIARY OUTPUT, DIN RAIL MOUNTING: 2.25A auxiliary wire terminal output controlled by voltage, temperature or time. Max total 222W (150W at 48VDC and 72W at 24VDC). DIN rail or screw tab mounting, operating temperature -40C to +65C (-40F to 149F).
The TPDIN-SC48-20 is a web manageable MPPT solar controller with built-in 7 port Gigabit passive PoE switch. Battery charging max 20A, PV Voc max = 100V, PV Vmp max = 90V. The controller uses temperature compensated smart battery charging to properly charge GEL, AGM, or Lithium batteries and extends their life. It has a balance charge mode for periodic battery bank maintenance. There are 4 Gigabit 802.3at or 24/48V passive PoE and 3 Gigabit 24/48V passive PoE ports. Each port is capable of 0.645A max. There is a wire terminal auxiliary output capable of 2.25A maximum. Total from all outputs is set at 150W at 48VDC and 72W at 24VDC for a max total of 222W. The web interface has full capabilities to measure and log battery voltage, battery current, input voltage/current, load current and battery temperature. Ports can be controlled by a settable ping watchdog to power cycle the port if communications to the unit are interrupted. The auxiliary port can be controlled by voltage or temperature or time. The unit supports automated email alerts if user programmed limits are exceeded. All inputs and outputs are surge and overload protected. Connectors and battery fuse are removable for easy maintenance. The controller can be mounted using the integral DIN rail mount bracket or using 2 mounting tabs. Model TPDIN-SC48-20.
Package weight: 4.15 lb.